#Pixie lungo nespresso full#

Return the used solution to the water tank when complete, and run the process again before refilling the reservoir with fresh, clean water.

#Pixie lungo nespresso full#

Press the hot water button (Essenza Plus) or Lungo button (Essenza Mini) to start the descaling process and run the full water tank through system. If descaling a Nespresso Essenza Mini, just press the Lungo and Espresso buttons for five seconds. Put your Essenza Plus into descaling mode by pressing the hot water, Lungo, and Espresso buttons at the same time for five seconds. To descale either your Nespresso Essenza Plus or Mini, first remove all capsules from the machine's used pod container and pod bay, and empty the drip tray and water reservoir.Īdd one Nespresso descaling sachet and add 0.5l of water (for Essenza Plus) or 0.6l of water (for Essenza Mini) to the water reservoir and place a one-litre container underneath the spout. You can then leave the descaling setting by pushing both the button and lever at the same time for three seconds - a new green light will confirm that you are ready to start brewing again. Push the button once more to rinse the system through with fresh water, with the machine once again stopping automatically when finished. The machine will automatically stop when finished, at which point, remove the water tank, rinse, and fill with water. Once you are in descaling mode, simply push the button at the top to start descaling. Note that you'll only have two minutes to set the descaling mode before the machine returns to 'Ready' settings. Enter descaling mode by pushing the lever down once by itself. To access the special functions menu, push both the main button and the lever down together for three seconds.

Now you need to put your machine into descaling mode. Add the contents of one Nespresso descaling solution packet and 0.5 litres of water to the water tank.